HMC Steam sterilizers HG 50 / HG 80 /HG 113 / HG 133

Sophisticated yet economical functionality

A large illuminated program display and easy to operate – the HG series fulfils every requirement of modern sterilization units and all wishes of the user regarding functionality and comfort. And all that at a sensationally low price!

Open and close at a touch - for safety reasons!

Simply press a button to open and close. However, the lid is not just opening and closing. At first it is only opening for about three inches – the first surge of steam is able to escape – then the lid is completely open and the internal space is ready to use.

While the lid is moving to the closing position, it pauses shortly before it is completely shut. When the lid is in the final position, the lock is automatically bolted. The bolt is monitored by two independent safety systems. It is impossible to open the lock unintentionally if it is under pressure.

Clearly arranged and illuminated

The large program display makes operation simple and instantly shows the most important parameters:
- Sterilizing temperature and pressure
- Sterilization time
- Remaining time until program end is reached
The run-down display gives an overview.

Configurated

3 preselected programs each for:
- Liquids
- AGAR sterilization, including a residual heat cycle
- Solids
- Steam pot programs
Special programs, e.g. for Durham tubes, can be selected without any problems.
Timer-controlled night-time program.

Comfort as standard

A low loading height and a smooth surface make loading and unloading a child's play. The baskets can not be caught accidentally on bolts or edges, because there are none. Modern documentation via RS232 SegoSoft® process documentation, automatic paper-free archive, data output as graphics or charts in PDF format and digital signature.

Spent-steam condenser as standard

A state-of-the-art condensation system with a large heat storage facility almost completely reduces the spent-steam emission during the deaeration phase. The condensate collector can be easily emptied. It is equipped with an electronic filling level indicator on the display. No water connector is required for the spent-steam condenser!

Safety included

All HMC steam sterilizers are manufactured at a modern plant using state-of-the-art processes and technologies. The design has been approved by TÜV Bayern e.V. All units comply with all applicable European standards and regulations and bear the CE mark.

Flexible temperature sensor - Thermolock

Batch documentation

Batch documentation makes processes transparent, assures quality and offers protections against legal claims. Batch printer or software for direct recording of sterilization data to demonstrate successful sterilization.

Double secured

Fast cooling as standard

A 100% practical feature and saves up to 40% of the batch time when sterilizing liquids: an air cooling that can be switched on during all programs and at any time.

Vacuum generator

Sterilizing in vacuum is recommended at
- textiles
- hollow article, tubes, bottles
- porous goods as long as these can be deaerated easily
- mixed materials (waste) easily accessible to steam, such as open waste bags or bins
The steam generator facilitates a deep vacuum and external chamber heating.
Vacuum programs comply with applicable standards and directives

Extended display

The 113 and 133 models have special extended control keys. Activation of pre- and drying vacuum.

Extended functions